DENON Service Bulletin OST-F1468 free download

File name Service Bulletin OST-F1468.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1468 Date: December 11, 2008 _____________________________________________________________ Model: DVD-3800BDCI Subject: Correction of the Firmware. Countermeasure is applicable only upon claim from the customer. Symptom: When the video signal is output from the HDMI output and the Component output by the resolution of "720p/60Hz" and "1080i/50Hz", about 40Pixel at the left of the picture is lacked. Solution: We corrected the firmware so that no malfunction occurs. MODIFICATION: We will supply the following program files for updating the subject models. Therefore, please record each program file on your PC, and update the unit. * Program Files to be supplied: Version after the update: 080926 1) Installation of the "IP FIRMWARE (Updater tool)". (1) Download "Updater tool" to PC from SDI, and unzip it. (2) Click "Updater.reg", and PC will install it automatically. 2) Preparing the updating of the IP firmware of the unit. (1) Please connect the unit to TV (Display) with "Composite video" and "HDMI" terminals. (2) Please connect the unit to PC with RS-232C straight cable. (3) Turn on the power of the unit. (4) Press the "OPEN/CLOSE" button and remove any Discs. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. (5) Press the "OPEN/CLOSE" button and close the Tray. (6) Press the buttons on the remote controller in the order of "2", "5", "8", "0" and "CLEAR". (7) Display indicates the following picture. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting